Ready-to-use operating mix for surface preparation in wheel-blasting

PROWHEELIUM® is a steel grit with a very narrow hardness range for surface preparation before coating, painting, enameling, metallizing. It was developed specially for customers who use GH hardness grit in wheel machines. PROWHEELIUM® considerably reduces machine wear and abrasive consumption. 

 

USERS BENEFITS 

 

#1 Quality : Optimum surface profile for painting, metallizing and other coatings

  • Exclusive size grading, which guarantees the consistency and effectiveness of the operating mix
  • Special heat treatments, giving the ideal balance of cleaning efficiency and durability
  • Higher stability of the operating mix in the machine vs. standard GH

#2 Performance : Air blasting results in wheel machines at optimum cost

  • Reduction in consumption (-30%)
  • Reduction in machine wear (-20% average)
  • Improved coating adhesion and reduced paint consumption
 

 

PRODUCT CHARACTERISTICS 


PROWHEELIUM® is a high quality, ready-to-use product for surface preparation in wheel machines when high roughness is required. 

 

PROWHEELIUM® Technical datasheet

Product name

PW 123

PW 145

PW 158

Nominal size (Sieve #)

0,71 mm 

(#25)

0,42 mm 

(#40)

0,30 mm 

(#50)

Hardness

59 - 61 HRc

Density

7,6 mini

Chemical composition

C≥0.85% _ Si≥0.4% _ 0.6%≤Mn≤1.2% _ S≤0.05% _ P≤0.05%

General shape

Angular

Product Illustration


Download the brochure

 

REFERENCES

 

    

 

CONTACT US FOR FURTHER INFORMATION ON PROWHEELIUM®